SYSTEM-1 :  “HITECH” PARALLEL THREADED COUPLERS USING COLD FORGING SYSTEM

We are proudly acknowledging ourselves as a Well Qualified & Known Manufacturer of REBAR COUPLERS asper BIS 16172:2014, BS & ACI codes in the name of HITECH for more than a DECADE and Served many Prestigeous Projects & Clients across India.

It is designed to withstand any stringent load conditions  in Full Tension and assured for 100% Barbreak performance which is far more than the Parent bars being used. Our Products are designed and manufactured in compliance with ACI318, JGJ107, UBC 1997, BS8110, BS 5400-Part 4, NF35-20-1, DIN1045, ISO/WD 15835 (Draft), BIS 456, IRC 2000 etc. Our Parent Materials of Couplers are having adequate Ultimate Tensile Strength of more than 150% of the Reinforcement bars ie. 700 N/mm2 and hence a coupled Joint shall able to withstand for Yield Tensile Strength of more than 125% of Reinforcement bars. 

Our “HITECH” Rebar couplers are based on Globally approved & Patented Parallel threaded mechanism where the The Ends of the Reinforcement Bars which are tobe joined shall be enlarged by Cold FORGING and Threaded in such a way that the Diameter of root of the threads shall is not lesser than Parent Bar. 

There is no process of removal/area reduction of steel Unlike other threading processes. In contrary, there is an increase of strength of the reinforcement to the tune of 15% due to hardening process.

THE MOST EFFECTIVE FEATURE OF THIS SYSTEM IS ITS ABILITY TO WITHSTAND HIGHER FATIGUE STRENGTH AS THE MATERIAL GRAINS ARE NOT REMOVED/DISTURBED OTHER THAN REALIGNING OF MATERIAL TO FORM THREADS.

It is also designed to withstand Cyclic loading, Low Fatigue, High Fatigue, Cyclic Tension-Compression, Slip Test, Strain Tests etc., which are essentially considered asper current BIS 16172:2014 codes to qualify the Couplers system.

SYSTEM-2 : “HITECH” PARALLEL THREADED ROLL FORMING SYSTEM

Our “MECH-JOINT” Rebar couplers are based on Globally approved & Patented Parallel threaded mechanism where There is no process of removal/area reduction of steel Unlike other TAPER threading processes where 20-40% of the steel area & its strength is reduced. In contrary, there is an increase of strength of the reinforcement to the tune of 15% due to hardening process. 

THE MOST EFFECTIVE FEATURE OF THIS SYSTEM IS ITS ABILITY TO WITHSTAND HIGHER FATIGUE STRENGTH AS THE MATERIAL GRAINS ARE NOT REMOVED/DISTURBED OTHERTHAN REALIGNING OF MATERIAL TO FORM THREADS USING THREE ROLLER SYSTEM.

SYSTEM-3 :  “HITECH” RAPID JOINT COUPLING SYSTEM

NEWLY INTRODUCED TECHNOLOGY OF OUR BANNER.

HI-TECH – A Well recognised firm in Mechanical Couplers Industry and proved successful track record for more than a decade, proudly announces our Latest Innovation of “Rapid Joint”- for quick jointing of any Reinforcements at any Stringent Locations of Structure.

AN ULTIMATE WIN-WIN PRODUCT FOR QUICK JOINTING OF REINFORCEMENTS

NEWLY INTRODUCED TECHNOLOGY OF OUR BANNER.

  • No Threading in Rebars.
  • No separate machine & manpower for threading process.
  • No need of Pre planning to stock the bars.
  • Ability to joint any Length to avoid Wastage of Rebars.
  • No Loss of Time & Money, Buy Couplers when you need it.
  • No Special Equipments. No Special Labours.
  • Strong Clamping force to withstand Required Ultimate Tensile Strength of 625 MPA.
  • Pull out Test with any random selection of couplers.